8.8 Ford Bolt On Lower Control Arm Housing Brackets

Ford 8.8 Bolt On Lower Control Arm Housing Brackets. The bracket holes are 1/2" not 12mm. Comes with all the necessary grade 8 hardware.

Requires trimming factory bracket at the bottom of bracket & the hump needs to be removed from the rear of the stock bracket.

Back side of bracket should be 90 degrees to pinion. Can be bolted or welded on.

• 1st hole is 1-1/2" below the factory hole
• Holes are 7/8" apart
• If you are running factory springs on the Lower Control Arm you may want to consider Adjustable Spring Jacks.