2010-UP Camaro Pro Strut Suspension Kit Use 15"& 17" Wheel
SKU: 4210PS-K-1
This list of items gives you what must be considered before you buy
1. Bottom edge of pinch weld front of rocker panel must be an optimum height of 4-5" off the ground, 5 1/2" maximum with a 26" tall tire.
2. Wheel/tire centerline must be moved forward 1" from the stock or centerline of front wheel well. A-arm spacer kit helps accomplish this.
3. Must achieve at least 7 degrees of caster angle measuring through the centerline of the upper and lower pivot locations.
4. Should be set up to 0 degree camber angle
5. Must run some type of travel limiter to limit the extension travel to no more than 2" of drop out or extension from ride height.
6. The tow and bumpsteer adjustment must be maintained within 1/16" through out the 2" of travel listed above in #5
7. With the car at ride height measure and set the tow at 1/8" narrower at the front of the tire than at the back. After making any tow adjustments and before measuring tow adjustment, roll the car back and forth 10-15 feet 2 or 3 times and always finishing rolling forward. Then you can take your measurement with a pair of tow plates.
8. Must make sure that all rod ends are clocked to prevent binding through out travel range. (Tie Rods - A-arms)
Benefits of this kit
- Less than 100 lbs for entire front kit
- Designed to accommodate low ride heights
- Allows full oil pan access in most applications
- Offers the most engine bay and header clearance
Standard Kit:
- Front Tube Race K-Member (4210FTST)
- 0 Degree Strange Rack and Pinion - S3448 (Click HERE for Product Info.)
- Strange Rack Bolt Kit - RC80753 (Click HERE for Product Info.)
- Strange Rack Adaptor - 333160-D (Click HERE for Product Info.)
- 2010 Camaro 4130 Spherical Bearing Rod End A-Arms - 4210TASB
- 14" Tie Rod Kit w/ Bumpsteer Kit - 333254-PS
- 8 Degree Custom Length Dbl. Adj. Struts - 350127-2-RCI
- 2010 Camaro Steel Weld In Caster Camber Plates - 340043
- Santhuff Strut Hat Adaptors - 340050
- Segmented Spacer Kit - RC80477
- RCI Steering Arms Installed On Struts - 350127-ST (RC80435 & RC80436)
- 2010 Camaro K-Member Bolt Kit - RC80505
- RCI Strut Tower Caps - 340044
- Strut Compression Limiters - 200205