{"product_id":"2010-up-camaro-pro-strut-suspension-kit-use-15-17-wheel","title":"2010-UP Camaro Pro Strut Suspension Kit  Use 15\"\u0026 17\" Wheel","description":"\u003cp\u003eThis list of items gives you what must be considered before you buy\u003c\/p\u003e\n\u003cp\u003e1. Bottom edge of pinch weld front of rocker panel must be an optimum height of 4-5\" off the ground, 5 1\/2\" maximum with a 26\" tall tire.\u003c\/p\u003e\n\u003cp\u003e2. Wheel\/tire centerline must be moved forward 1\" from the stock or centerline of front wheel well. A-arm spacer kit helps accomplish this.\u003c\/p\u003e\n\u003cp\u003e3. Must achieve at least 7 degrees of caster angle measuring through the centerline of the upper and lower pivot locations.\u003c\/p\u003e\n\u003cp\u003e4. Should be set up to 0 degree camber angle\u003c\/p\u003e\n\u003cp\u003e5. Must run some type of travel limiter to limit the extension travel to no more than 2\" of drop out or extension from ride height.\u003c\/p\u003e\n\u003cp\u003e6. The tow and bumpsteer adjustment must be maintained within 1\/16\" through out the 2\" of travel listed above in #5\u003c\/p\u003e\n\u003cp\u003e7. With the car at ride height measure and set the tow at 1\/8\" narrower at the front of the tire than at the back. After making any tow adjustments and before measuring tow adjustment, roll the car back and forth 10-15 feet 2 or 3 times and always finishing rolling forward. Then you can take your measurement with a pair of tow plates.\u003c\/p\u003e\n\u003cp\u003e8. Must make sure that all rod ends are clocked to prevent binding through out travel range. (Tie Rods - A-arms)\u003c\/p\u003e\n\u003cp\u003eBenefits of this kit\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess than 100 lbs for entire front kit\u003c\/li\u003e\n\u003cli\u003eDesigned to accommodate low ride heights\u003c\/li\u003e\n\u003cli\u003eAllows full oil pan access in most applications\u003c\/li\u003e\n\u003cli\u003eOffers the most engine bay and header clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStandard Kit:\u003c\/p\u003e\n\u003ctable class=\"table table-striped table-condensed\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFront Tube Race K-Member (4210FTST)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e0 Degree Strange Rack and Pinion - S3448 (Click \u003c\/span\u003e\u003ca href=\"https:\/\/www.racecraft.com\/rack-and-pinions-c-92_97\/strange-light-weight-steering-rack-p-2987.html?\" style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e for Product Info.)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrange Rack Bolt Kit - RC80753 (Click \u003ca href=\"https:\/\/www.racecraft.com\/index.php?main_page=product_info\u0026amp;cPath=92_97\u0026amp;products_id=1729\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e for Product Info.)\u003c\/li\u003e\n\u003cli\u003eStrange Rack Adaptor - 333160-D (Click \u003ca href=\"https:\/\/www.racecraft.com\/index.php?main_page=product_info\u0026amp;cPath=92_93\u0026amp;products_id=281\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e for Product Info.)\u003c\/li\u003e\n\u003cli\u003e2010 Camaro 4130 Spherical Bearing Rod End A-Arms - 4210TASB\u003c\/li\u003e\n\u003cli\u003e14\"  Tie Rod Kit w\/ Bumpsteer Kit - 333254-PS\u003c\/li\u003e\n\u003cli\u003e8 Degree Custom Length Dbl. Adj. Struts - 350127-2-RCI\u003c\/li\u003e\n\u003cli\u003e2010 Camaro Steel Weld In Caster Camber Plates - 340043\u003c\/li\u003e\n\u003cli\u003eSanthuff Strut Hat Adaptors - 340050\u003c\/li\u003e\n\u003cli\u003eSegmented Spacer Kit - RC80477\u003c\/li\u003e\n\u003cli\u003eRCI Steering Arms Installed On Struts - 350127-ST (RC80435 \u0026amp; RC80436)\u003c\/li\u003e\n\u003cli\u003e2010 Camaro K-Member Bolt Kit - RC80505\u003c\/li\u003e\n\u003cli\u003eRCI Strut Tower Caps - 340044\u003c\/li\u003e\n\u003cli\u003eStrut Compression Limiters - 200205\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Racecraft","offers":[{"title":"15\" Wheel","offer_id":67792656760887,"sku":"4210PS-K-1","price":9583.0,"currency_code":"CAD","in_stock":true},{"title":"17\" Wheel","offer_id":67792656793655,"sku":"4210PS-K-2","price":9583.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/4299\/6535\/files\/4210PS-K5.jpg?v=1794764673","url":"https:\/\/tinsoldierracecars.com\/en-ca\/products\/2010-up-camaro-pro-strut-suspension-kit-use-15-17-wheel","provider":"Tin Soldier Racecars","version":"1.0","type":"link"}